How to Install a Gas Oven without Dangerous Leaks

Installing a gas oven can prove to be quite a tricky affair, especially if you are doing this for the first time in your life. While it is best to ask for outside help, or rather, the help of a professional in order to set up a gas oven in a smooth and hassle free manner, there are various ways by which you can do this small appliance installed on your own as well. To know more about how you can set up a gas oven without the danger of leakage, read on.

 

6 Important Safety measures before Installing a gas oven

 

1. Acquire the Right Gas Connector

The first step that you need to take when you install gas oven, is to get hold of the right type of gas connector. This is something that you ought to buy at the time of purchasing the gas stove, so that you can come home and set it up easily. The gas connector needs to be of the right size and form if it is to be used successfully during the process of installation. If you are not sure about what the right gas connector is, you can ask store authorities to help you out in this respect.

 

2. Pull the Entire Range

The second step that you need to take is to pull out the entire range. This is something that you need to do in a slow and steady manner as any error here and there can result in the entire process going awry, forcing you to start the installation procedure once again from scratch.

 

3. Wrap the Pipe Threads

The third step to take would be to wrap up all the pipe threads in a safe and secure manner, making sure that these are held together as firmly as possible. It is best to make use of protective material to get the wrapping done in as secure a manner as possible.

 

4. Attach Gas Line to Connector

The fourth step to take is to attach the gas line to the connector, using a street elbow in the process. You need to be very careful when carrying out this step. Once the gas line as been attached to the connector, you need to test for yourself and see whether connection is firm enough or not.

 

5. Tighten the Nuts Firmly

The fourth step that you need to take when installing a gas stove is to tighten the nuts as firmly as you can. The tighter the nuts of the stove are, the less likely it will be to leak. Once you have tightened all the nuts of the gas stove you need to check and see if the stove has been installed in secure enough fashion or if the possibility of a leak still exists. If this is the case, you need to carry out the nut tightening process once again.

 

6. Move the Stove to the New Location

The final step that you have to take for the installation of a gas stove is to go ahead and move this stove to its new location. You need to wait for an hour or two before you turn the stove on to see whether it is working properly or not.

Some Important Things to Know when using a Gas Stove

 

Keep the Flame Down at all Times

If you use a gas stove for cooking, then you need to keep the flame down to a reasonable temperature all of time. The flame should not be too low so as to slow down the cooking process, but it should not be too high either, as a very high and aggressive flame can end up catching fire with something or the other in the kitchen, injuring you and may be several others in the bargain. The flame needs to be kept down at all times to ensure a safe and secure cooking experience.

Clean the Gas Stove on a Regular Basis

The gas stove should be cleaned out on a regular basis. The stove needs to be wiped first with a wet cloth and then with a dry one when it is not being used. You need to turn off the flame completely and shut down the stove before you begin to clean it. Cleaning the gas stove is absolutely imperative as the settlement of dust and dirt particles will not only prove to be harmful for the cooking, contaminating the food that is cooked, but can also make the stove a little more combustible than usual.

Keep a Fire Extinguisher at Hand

You need to keep a fire extinguisher in a kitchen where a gas stove is used. While the gas stove is relatively safe to use and allows you to cook some great food over a hot flame, it is extremely vulnerable to accident and hazard and you need to make sure that you are sufficiently safeguarded against such hazards. One way to do so would be by keeping a fire extinguisher close at hand, so that in the event that a fire does break out in the kitchen, you will be able to use this to douse the flames immediately.

Be Mindful of your Clothing

You need to be mindful of the type of clothes that you wear when you are cooking on a gas stove rather than an electric stove. Be sure to wear light weight cotton garments as there are fewer chances of you injuring yourself if a mishap does occur while cooking.

 

 Conclusion

Thus, by keeping all the steps that have been mentioned above in mind and by carrying them out perfectly, you will be able to get a gas stove installed in a safe and secure manner. The gas stove needs to be set up with a lot of care as it operates on liquid gas and is therefore prone to leakage. You need to be diligent and mindful at the time of setting this up so as to avoid any hazard when using the gas stove at a later date.

Related Post